ZyXEL Communications Prestige 681 Guía de usuario descargar pdf (Pagina 29)

Prestige 681 SDSL Router

Installation & Setup 2-1

Chapter 2:

Hardware Installation & Initial Setup

This chapter describes the physical features of the

Prestige and how to make the cable connections

2.1 Front Panel LEDs OF P681

The LED indicators on the front panel indicate the operational status of the Prestige 681. The table below

the diagram describes the LED functions:

Figure 2-1 Prestige 681 Front Panel.

Table 2-1 Front Panel LED Description

PWR

The PWR (power) LED is on when power is applied to the Prestige.

SYS

A steady on SYS (system) LED indicates the Prestige is on and functioning properly

while an off SYS LED indicates the system is not ready or a malfunction. The

system is rebooting when the SYS LED is blinking.

LAN 10M

A steady green light indicates a 10Mb Ethernet connection. The LED blinks when

data is being sent/received.

LAN 100M

A steady green light indicates a 100Mb Ethernet connection. The LED blinks when

data is being sent/received.

SDSL

The SDSL LED is on when the Prestige is connected successfully to a DSLAM. The

LED blinks when the link is still synchronizing – note that this may take up to 10

minutes.

2.2 Prestige 681 Rear Panel and Connections

The following figure shows the rear panel connections of your Prestige.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 147 148

Sin comentarios

ZyXEL Communications Prestige 681 Guía de usuario Pagina 29