ZyXEL Communications VES-1012 - Guía de usuario descargar pdf (Pagina 155)

VES-1000 Series Ethernet Switch

Firmware and Configuration File Maintenance 21-1

Chapter 21

Firmware and Configuration File

Maintenance

This chapter tells you how to back up/restore your configuration file and upload new firmware and/or

configuration file.

21.1 Filename Conventions

The configuration file (often called the romfile or rom-0) contains the factory default settings in the menus such as

password, DHCP Setup, TCP/IP Setup, etc. It arrives from ZyXEL with a “rom” filename extension. Once you

have customized the VES's settings, they can be saved back to your computer under a filename of your choosing.

ZyNOS (ZyXEL Network Operating System sometimes referred to as the “ras” file) is the system firmware and

has a “bin” filename extension. With many FTP and TFTP clients, the filenames are similar to those seen next.

ftp> put firmware.bin ras

This is a sample FTP session showing the transfer of the computer file " firmware.bin" to the VES.

ftp> get rom-0 config.cfg

This is a sample FTP session saving the current configuration to the computer file “config.cfg”.

If your (T)FTP client does not allow you to have a destination filename different than the source, you will need to

rename them as the VES only recognizes “rom-0” and “ras”. Be sure you keep unaltered copies of both files for

later use.

The following table is a summary. Please note that the internal filename refers to the filename on the VES and the

external filename refers to the filename not

on the VES, that is, on your computer, local network or FTP site and

so the name (but not the extension) may vary. After uploading new firmware, see the ZyNOS F/W Version field

in Menu 24.2.1 — System Maintenance — Information to confirm that you have uploaded the correct firmware

version. The AT command is the command you enter after you press “y” when prompted in the SMT menu to go

into debug mode.

Table 21-1 Filename Conventions

FILE TYPE INTERNAL

NAME

EXTERNAL

NAME

DESCRIPTION

Configuration File Rom-0 *.rom This is the configuration filename on the VES. Uploading

the rom-0 file replaces the entire ROM file system,

including your VES configurations, system-related data

(including the default password), the error log and the

trace log.

Firmware Ras *.bin This is the generic name for the ZyNOS firmware on the

VES.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 226 227

Sin comentarios

ZyXEL Communications VES-1012 - Guía de usuario Pagina 155