ZyXEL Communications VES-1012 - Guía de usuario descargar pdf (Pagina 172)

VES-1000 Series Ethernet Switch

22-4 System Maintenance 2

Figure 22-4 Menu 24.11.1 - Secured Client Sets

Table 22-3 Menu 24.11.1 - Secured Client Sets

FIELD DESCRIPTION EXAMPLE

# This is the client set index number. 1

A “A” indicates the client set is Active and “N” indicates that it is Not active A

Addr_START The default value for a start and end address is 0.0.0.0, which means you don’t

care which host is trying to use a service (Telnet, FTP, ICMP).

0.0.0.0

Addr_END This field displays the end IP address in a range of client IP addresses that may

use the service(s) defined in the next field.

0.0.0.0

TFWI “Y” (Yes) means that the specified service (T for Telnet, F for FTP, W for Web

and I for ICMP) is enabled for this client set. Similarly, “N” (No) means it is not.

YNYY

To edit a client set, type a client set index number and then press [ENTER] or press [ESC] to cancel and go back to

menu 24.11.

22.3.2 Secured Client Configuration

Type a client set index number in menu 24.11.1 and then press [ENTER] to display this menu.

Figure 22-5

Menu 24.11.1.1 - Secured Client Configuration

Menu 24.11.1 - Secured Client Sets

# A Addr_START Addr_END T F W I

- - --------------- --------------- - - - -

1 A 0.0.0.0 0.0.0.0 Y N Y Y

2 N

3 N

4 N

Enter Secured Client Set Number (1-4) to Configure:

Menu 24.11.1.1 - Secured Client Configuration

Active= Yes

Secured IP:

addr start= 0.0.0.0

addr end= N/A

Service Type:

TELNET Service= Yes

FTP Service= Yes

Web Service= Yes

ICMP Service= Yes

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 226 227

Sin comentarios

ZyXEL Communications VES-1012 - Guía de usuario Pagina 172