ZyXEL Communications STB-2101H Guía de usuario descargar pdf (Pagina 27)

BeeSmart LITE Documentation

10.

Motorola VIP 1003

Technotrend TT-micro IP830

Vestel IP7350

Zyxel STB-2101H

Zenterio/Sweden Telecom STC-Zi3040

Every BeeSmart LITE customer should get required STB devices directly from the STB vendors or their local suppliers. Contact

details for every vendor are stated in the next sections.

For successful installation and provisioning of STB devices, every BeeSmart LITE customer should follow the procedures and environment

preparation as described in instructions that you got from the STB vendors. From the STB vendor or supplier that send you the STB devices, you

should get the following information:

Procedure how to connect the STB to the BeeSmart LITE

What SW needs to be installed on the STB when delivered

Where and how to get the SW update with correct SW image for the BeeSmart LITE

How to perform the SW upgrade

How to configure MW url and other STB settings (dhcp, IP, NTP, DNS…) on the STB

Procedures for troubleshooting in case of potential problems

How and where to get additional help if needed

SW images and boot servers for above listed STB models are not part of the BeeSmart LITE installation and should be

delivered to you by the STB vendors or local suppliers from where you got the STB devices.

BeeSmart LITE has limited number of supported STB types. Please upgrade to full BeeSmart version to get full range of

supported STB devices.

General Procedure

First, please make sure that STB is connected to the correct IP network and that it is accessible from the BeeSmart LITE server. Please check the

installation and configuration instructions from the specific STB vendor that you are using, where the procedure is explained in details.

Please note, that procedure varies between different STB vendors.

In general it goes like this:

Add STB to the BeeSmart LITE Admin following the instructions in the Administration Guide. Please make sure that you configure correct

MAC address, correct STB type and also the correct remote control.

Connect STB to the network

STB should have the correct SW for the BeeSmart LITE with Ekioh SVG engine support installed. If not already delivered with the correct

SW, you should make the upgrade following the instructions provided by the STB vendor or reseller.

STB should get the IP address from the DHCP server

STB should get the DNS and NTP parameters either via DHCP options or it is configured manually (this may differ between different STB

vendors)

STB should get the correct BeeSmart LITE URL address either via DHCP options or it is configured manually (this may differ between

different STB vendors)

There should be login screen on the TV. Log in using configured PIN for that user (default is 1234).

In case you don't get to the login screen, please make sure that you exactly followed all the steps in the STB vendor instructions and that

you configured the BeeSmart LITE according to the Administration Guide.

Check with the STB vendor or reseler if issue is related to points 3-6

Check the BeeSmart LITE forum or FAQ section if issue still present

Airties Air 7120

Please contact Airties at the for ordering the STB samples. According to your location, the respective sales person will contact[email protected]

you shortly. Please also mention that it goes for BeeSmart LITE installation.

Required SW and instructions will be delivered together with the STBs. You need at least v0.1.0.14 or higher firmware on the Airties STB.

Albis SceneGate 8000

Together Albis Technologies’ IPTV STBs and BeeSmart Lite solution middleware enable attractive IPTV services and quality user experiences.

1 2 ... 22 23 24 25 26 27 28 29

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications STB-2101H Guía de usuario Pagina 27

Comentarios a estos manuales