ZyXEL Communications STB-2101H Guía de usuario descargar pdf (Pagina 6)

BeeSmart LITE Documentation

Please make sure that the BeeSmart LITE installation bundle was downloaded successfully without any errors. Please check the MD5 hash that

is provided on the BeeSmart LITE web page.

I finished the OS installation and wanted to start the /home/beesmart /.BS-Lite.install script as stated in the installation

instructions but this file is missing. What can I do?

You can check the BeeSmart LITE installation bundle on you DVD and manually copy BS-Lite.install script in the /home/beesmart folder and start

it. If the folder is also missing, you should create /home/beesmart.

Please note, that if BS-Lite.install script is missing, it can also mean that OS installation was not completed successfully. This might be due to

some HW problems, or not using the correct kick start file, or beesmart user was not created. In this cases, even with copying script manually,

script can't finish successfully because system partition is not big enough or some other OS parameters were not set during the OS installation. In

these cases, it is recommended to install OS again with the provided installation bundle.

Is it possible to install VMWare player on the Linux system provided with BeeSmart Lite?

BeeSmart Lite is installed together with CentOS operating system. Users have a full access to the operating system, so any additional software

package can be installed later on.

I have issues with the BeeSmart LITE installation. What should I do?

Here are the general rules:

Check that the Installation bundle was successfully transferred without any errors. Use the MD5 hash that is provided on the BeeSmart

LITE web page

Check that you are using the latest BeeSmart LITE SW version. In every version there are several installation improvements from the

issues that are reported on he BeeSmart LITE forum. It is highly recommended to always use the latest BeeSmart LITE release.

Check that you have the latest BeeSmart LITE documentation and instructions

Read carefully the FAQ section in order to find answers for similar issues as you are facing

Check the BeeSmart forum if there are similar issues reported and already answered

Report your issue on the BeeSmart LITE forum. We will try to instruct you what to do and potentially included fixes in the next BeeSmart

LITE release.

I'm successfully using BeeSmart LITE, but now I need to change the network configuration. How can I change the IP

address?

Please, don't change the IP address and other network configuration manually. IP address should be changed not only on the OS level, but also

for several SW components. Please make sure that for changing IP address you use the script bs_config located in the /home/beesmart/scripts.

You can run it with the ./bs_config. Check the instructions in the BeeSmart LITE Installation Guide for the details.

How can I connect STB device to the BeeSmart LITE server?

First, please make sure that STB is connected to the correct IP network and that it is accessible from the BeeSmart LITE server. Please check the

installation and configuration instructions from the specific STB vendor that you are using, where the procedure is explained in details. Please

note, that procedure varies between different STB vendors, but in general it goes like this:

Add STB to the BeeSmart LITE Admin following the instructions in the Administration Guide. Please make sure that you configure correct

MAC address, correct STB type and also the correct remote control.

Connect STB to the network

STB should have the correct SW for the BeeSmart LITE with Ekioh SVG engine support installed. If not already delivered with the correct

SW, you should make the upgrade following the instructions provided by the STB vendor or reseller.

STB should get the IP address from the DHCP server

STB should get the DNS and NTP parameters either via DHCP options or it is configured manually (this may differ between different STB

vendors)

STB should get the correct BeeSmart LITE URL address either via DHCP options or it is configured manually (this may differ between

different STB vendors)

There should be login screen on the TV. Log in using configured PIN for that user (default is 1234).

In case you don't get to the login screen, please make sure that you exactly followed all the steps in the STB vendor instructions and that

you configured the BeeSmart LITE according to the Administration Guide.

Check the BeeSmart LITE forum if issue still present

Where should I get the proper SW and instructions for the STB devices?

You get the proper SW and all needed instructions from the STB vendor or reseller where you got the STB. Please check the STB section on the

BeeSmart LITE web page in order to get the sales and support contact for your preferred STB vendor. Procedure how to get the STB samples,

proper SW, instructions and support defers between different STB vendors, but you have the contact on the BeeSmart LITE web page, in the STB

section, for every STB vendor supported on the BeeSmart LITE platform.

Which SW should I install on my STB in order to work with BeeSmart LITE? Which web browser should I use on the

STB?

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications STB-2101H Guía de usuario Pagina 6

Comentarios a estos manuales