ZyXEL Communications G-570U Guía de usuario descargar pdf (Pagina 24)

ZyXEL G-570U User’s Guide

24 Chapter 1 Getting to Know Your G-570U

Figure 1 WDS Functionality Example

OTIST (One-Touch Intelligent Security Technology)

OTIST allows your G-570U to assign its SSID and security settings (WEP or WPA-PSK) to

the ZyXEL wireless adapters that support OTIST and are within transmission range. The

ZyXEL wireless adapters must also have OTIST enabled. The G-570U also supports OTIST in

Wireless Client mode.

10/100M Auto-negotiating Ethernet/Fast Ethernet Interface

This auto-negotiating feature allows the G-570U to detect the speed of incoming transmissions

and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps

or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.

Ethernet port connections can be in half-duplex or full-duplex mode. Full-duplex refers to a

device's ability to send and receive simultaneously, while half-duplex indicates that traffic can

flow in only one direction at a time. The Ethernet port must use the same speed or duplex

mode setting as the peer Ethernet port in order to connect.

10/100M Auto-crossover Ethernet/Fast Ethernet Interface

The LAN interface automatically adjusts to either a crossover or straight-through Ethernet

cable.

Reset Button

The G-570U reset button is built into the rear panel. Use this button to restart the device or

restore the factory default password.

802.11g Wireless LAN Standard

The ZyXEL wireless products containing the letter "G" in the model name, such as G-570U

and G-162, comply with the IEEE 802.11g wireless standard.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 161 162

Sin comentarios

ZyXEL Communications G-570U Guía de usuario Pagina 24