ZyXEL Communications G-570U Guía de usuario descargar pdf (Pagina 35)

ZyXEL G-570U User’s Guide

Chapter 2 Management Computer Setup 35

Note: The wireless stations and G-570U must use the same SSID, channel and

wireless security settings for wireless communication.

If you do not enable any wireless security on your G-570U, your network traffic

is visible to any wireless networking device that is within range.

2.4 Restarting the G-570U

Press and immediately release the RESET button to restart the G-570U.

Note: Holding the RESET button in for ten seconds or longer resets the device to the

factory-default settings.

2.5 Resetting the G-570U

If you forget the G-570U's IP address or your password, to access the G-570U you will need to

reload the factory-default using the RESET button. Resetting the G-570U replaces the current

configuration file with the factory-default configuration file. This means that you will lose all

configurations that you had previously. The following parameters will be reset to the default

values.

2.5.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in two ways:

1 Use the RESET button on the G-570U to upload the default configuration file (hold this

button in for at least ten seconds).

2 Use the web configurator to restore defaults. Click Management > Configuration File.

From here you can restore the G-570U to factory defaults.

Table 3 Factory Defaults

PARAMETER DEFAULT VALUE

IP Address 192.168.1.2

Password 1234

Wireless Security Disabled

SSID ZyXEL G-570U

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 161 162

Sin comentarios

ZyXEL Communications G-570U Guía de usuario Pagina 35