Zyxel-communications P-2602HW(L) Series Manual de usuario descargar pdf (Pagina 147)

100

101

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 10 Network Address Translation (NAT) Screens 147

10.5 Configuring Port Forwarding

Note: If you do not assign a Default Server IP address, the ZyXEL Device discards

all packets received for ports that are not specified here or in the remote

management setup.

Click Network > NAT > Port Forwarding to open the following screen.

See Appendix F on page 371 for port numbers commonly used for particular services.

Figure 81 Port Forwarding

The following table describes the fields in this screen.

Table 49 Port Forwarding

LABEL DESCRIPTION

Default Server

Setup

Default Server In addition to the servers for specified services, NAT supports a default server. A

default server receives packets from ports that are not specified in this screen. If

you do not assign a Default Server IP address, the ZyXEL Device discards all

packets received for ports that are not specified here or in the remote management

setup.

Port Forwarding

Service Name Select a service from the drop-down list box.

Server IP Address Enter the IP address of the server for the specified service.

Add Click this button to add a rule to the table below.

# This is the rule index number (read-only).

Active Click this check box to enable the rule.

Service Name This is a service’s name.

Start Port This is the first port number that identifies a service.

End Port This is the last port number that identifies a service.

Server IP Address This is the server’s IP address.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 426 427

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2602HW(L) Series Manual de usuario Pagina 147

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2602HW(L) Series