Zyxel-communications P-2602HW(L) Series Manual de usuario Pagina 193

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 427
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 192
P-2602H(W)(L)-DxA Series User’s Guide
Chapter 14 Firewall Configuration 193
CHAPTER 14
Firewall Configuration
This chapter shows you how to enable and configure the ZyXEL Device firewall.
14.1 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your
ZyXEL Device has to offer. For this reason, it is recommended that you configure your
firewall using the web configurator. CLI commands provide limited configuration options and
are only recommended for advanced users.
14.2 Firewall Policies Overview
Firewall rules are grouped based on the direction of travel of packets to which they apply:
Note: The LAN includes both the LAN port and the WLAN.
By default, the ZyXEL Device’s stateful packet inspection allows packets traveling in the
following directions:
LAN to LAN/ Router
This allows computers on the LAN to manage the ZyXEL Device and communicate
between networks or subnets connected to the LAN interface.
LAN to WAN
By default, the ZyXEL Device’s stateful packet inspection drops packets traveling in the
following directions:
•WAN to LAN
•WAN to WAN/ Router
This prevents computers on the WAN from using the ZyXEL Device as a gateway to
communicate with other computers on the WAN and/or managing the ZyXEL Device.
You may define additional rules and sets or modify existing ones but please exercise
extreme caution in doing so.
LAN to LAN/ Router WAN to LAN
LAN to WAN WAN to WAN/ Router
Vista de pagina 192
1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 426 427

Comentarios a estos manuales

Sin comentarios