Zyxel-communications P-2602HW(L) Series Manual de usuario Pagina 268

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 427
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 267
P-2602H(W)(L)-DxA Series User’s Guide
268 Chapter 21 Remote Management Configuration
The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
There is a firewall rule that blocks it.
21.1.2 Remote Management and NAT
When NAT is enabled:
Use the ZyXEL Device’s WAN IP address when configuring from the WAN.
Use the ZyXEL Device’s LAN IP address when configuring from the LAN.
21.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling.
21.2 WWW
To change your ZyXEL Device’s World Wide Web settings, click Advanced > Remote
MGMT to display the WWW screen.
Figure 141 Remote Management: WWW
Vista de pagina 267
1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 426 427

Comentarios a estos manuales

Sin comentarios