Zyxel-communications P-2602HW(L) Series Manual de usuario Pagina 229

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 427
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 228
P-2602H(W)(L)-DxA Series User’s Guide
Chapter 17 VPN Screens 229
17.9.1 ID Type and Content Examples
Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
The two ZyXEL Devices in this example can complete negotiation and establish a VPN
tunnel.
The two ZyXEL Devices in this example cannot complete their negotiation because ZyXEL
Device B’s Local ID type is IP, but ZyXEL Device As Peer ID type is set to E-mail. An “ID
mismatched” message displays in the IPSEC LOG.
17.10 Pre-Shared Key
A pre-shared key identifies a communicating party during a phase 1 IKE negotiation
(seeSection 17.12 on page 234for more on IKE phases). It is called “pre-shared” because you
have to share it with another party before you can communicate with them over a secure
connection.
17.11 Editing VPN Policies
Click an Edit icon in the VPN Setup Screen to edit VPN policies.
Table 85 Matching ID Type and Content Configuration Example
ZYXEL DEVICE A ZYXEL DEVICE B
Local ID type: E-mail Local ID type: IP
Local ID content: tom@yourcompany.com Local ID content: 1.1.1.2
Peer ID type: IP Peer ID type: E-mail
Peer ID content: 1.1.1.2 Peer ID content: tom@yourcompany.com
Table 86 Mismatching ID Type and Content Configuration Example
ZYXEL DEVICE A ZYXEL DEVICE B
Local ID type: IP Local ID type: IP
Local ID content: 1.1.1.10 Local ID content: 1.1.1.10
Peer ID type: E-mail Peer ID type: IP
Peer ID content: aa@yahoo.com Peer ID content: N/A
Vista de pagina 228
1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 426 427

Comentarios a estos manuales

Sin comentarios