Zyxel-communications P-2602HW(L) Series Manual de usuario descargar pdf (Pagina 66)

100

101

P-2602H(W)(L)-DxA Series User’s Guide

66 Chapter 3 Internet and Wireless Setup Wizard

The following table describes the labels in this screen.

3 Configure your wireless settings in this screen. Click Next.

Figure 25 Wireless LAN

The following table describes the labels in this screen.

Table 12 Wireless LAN Setup Wizard 1

LABEL DESCRIPTION

Active Select the check box to turn on the wireless LAN.

Enable OTIST Select the check box to enable OTIST if you want to transfer your ZyXEL

Device’s SSID and WEP or WPA-PSK security settings to wireless clients that

support OTIST and are within transmission range.

You must also activate and start OTIST on the wireless client at the same time.

The process takes three minutes to complete.

Setup Key Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to

use the same OTIST Setup Key on the ZyXEL Device and wireless clients.

Back

Click Back to display the previous screen.

Next Click Next to proceed to the next screen.

Exit Click Exit to close the wizard screen without saving.

Table 13 Wireless LAN Setup Wizard 2

LABEL DESCRIPTION

Network

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless

LAN.

If you change this field on the ZyXEL Device, make sure all wireless stations use the

same SSID in order to access the network.

Channel

Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a

channel. Select a channel ID that is not already in use by a neighboring device.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 426 427

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2602HW(L) Series Manual de usuario Pagina 66

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2602HW(L) Series