Zyxel-communications WPA-1000 Manual de usuario descargar pdf (Pagina 27)

Chapter 2 WPA-1000 Hardware

WPA-1000 User’s Guide

2.3 Standby Screen

Connect the WPA-1000 to the projector (see the Quick Start Guide for instructions). The next

screen appears on your projector screen when your WPA-1000 is successfully connected to the

projector. It contains important information that you should write down. You will need this

information later.

Figure 6 Standby Screen

The table below describes the labels on the screen.

LAN Green On The device has a successful LAN connection.

Blinking The WPA-1000 is sending/receiving data.

Off The LAN is not connected.

WLAN Green On The device has a successful wireless

connection.

Blinking The device is sending/receiving data through the

wireless LAN.

Off The device has no wireless connection.

Table 2 Front Panel LEDs (continued)

LED COLOR STATUS DESCRIPTION

Table 3 Standby Screen

LABEL DESCRIPTION

to log into it.

SSID This is the name that identifies the WPA-1000 wireless network. Computers must

use the same SSID, channel and WEP as the WPA-1000 in order to connect

wirelessly to it.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 159 160

Sin comentarios

Zyxel-communications WPA-1000 Manual de usuario Pagina 27