Zyxel-communications WPA-1000 Manual de usuario descargar pdf (Pagina 53)

WPA-1000 User’s Guide

CHAPTER 5

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential

problems are divided into the following categories.

• Power, Hardware Connections, and LEDs

• WPA-1000 Access and Login

• Projection Problems

• Internet Access Via the WPA-1000

• Resetting the WPA-1000 to Its Factory Defaults

5.1 Power, Hardware Connections, and LEDs

V The WPA-1000 does not turn on. None of the LEDs turn on.

1 Make sure the WPA-1000 is turned on.

2 Make sure you are using the power cord included with the WPA-1000.

3 Make sure the power cord is connected to the WPA-1000 and plugged in to an

appropriate power source. Make sure the power source is turned on.

4 Turn the WPA-1000 off and on.

5 If the problem continues, contact the vendor.

V One of the LEDs does not behave as expected.

1 Make sure you understand the normal behavior of the LED. See Section 2.2 on page 26.

2 Check the hardware connections. See the Quick Start Guide and Section 2.1 on page 25.

3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.

4 Turn the WPA-1000 off and on.

5 If the problem continues, contact the vendor.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 159 160

Sin comentarios

Zyxel-communications WPA-1000 Manual de usuario Pagina 53