Zyxel-communications WPA-1000 Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Chapter 4 The Web Configurator Screens
WPA-1000 User’s Guide
49
Figure 31 System Setup > Firmware Upgrade
The table below describes the labels in the System Setup > Firmware Upgrade screen.
4.7.3 Reboot System
Click Reboot in this screen to turn off the WPA-1000 and perform a software restart. You need
to restart the WPA-1000 when you make certain configuration changes to it and you want to
apply the changes. A software restart is faster than turning the WPA-1000 off and then turning
it on again. Before shutting down or restarting, make sure that no one is connected to the
WPA-1000.
Table 13 System Setup > Firmware Upgrade
LABEL DESCRIPTION
Firmware Version This field displays the current firmware version on the WPA-1000.
Release Date This field displays the date (in year-month-date format) the firmware on
the WPA-1000 was released.
Check Sum This number helps a technician know if the firmware was uploaded
correctly when troubleshooting.
File Path Type the location of the firmware file you want to upload or click Browse
to find the file on your computer. The WPA-1000 firmware file should have
an *.awd file name extension, for example, ‘WPA-1000.awd.’
Upgrade Click Upgrade to upload the new firmware. The WPA-1000 automatically
restarts after you upgrade. Wait until the restart completes before
accessing the WPA-1000 again. If you interrupt the upgrade, then the
WPA-1000 may become unusable.
Reset
Click Reset to erase content in the File Path field.
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 159 160

Comentarios a estos manuales

Sin comentarios