ZyXEL Communications G-102 Guía de usuario descargar pdf (Pagina 47)

ZyXEL G-1000 v2 User’s Guide

Chapter 3 Wizard Setup 47

3.3.4 Apply Settings

If you changed the SSID on your device or implemented any security, then you will have to

make the corresponding changes on your wireless station to reconnect to the G-1000 v2.

The following table describes the labels in this screen.

Note: If you changed the SSID on your device or implemented any security, then you

will have to make the corresponding changes on your wireless stations to

reconnect to the AP.

If you changed the IP address of your G-1000 v2 or if an IP address is assigned

to the G-1000 v2 automatically, you can access the device by using the new IP

address or typing “http://zyxelXXXX” (where XXXX are the last four digits of

your devices MAC address) in your browser. The MAC address can be found

on the back label of your G-1000 v2.

Congratulations, you have completed your configuration wizard. Click Finish to exit the

wizard.

Table 13 Apply Settings

LABEL DESCRIPTION

Back Click Back to display the previous screen.

Apply Click Apply to save your configuration settings.

Exit Click Exit to quit the wizard without saving the changes.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 197 198

Sin comentarios

ZyXEL Communications G-102 Guía de usuario Pagina 47