ZyXEL Communications G-102 Guía de usuario descargar pdf (Pagina 56)

ZyXEL G-1000 v2 User’s Guide

56 Chapter 4 Wireless LAN

The following table describes the wireless LAN security labels in this screen.

4.4.4 WPA(2)-PSK

In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless

LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security

Mode list.

Table 18 Wireless: Static WEP Encryption

LABEL DESCRIPTION

Security Mode Choose Static WEP from the drop-down list box.

Passphrase You can generate or manually enter a WEP key by either:

Entering a Passphrase (up to 32 printable characters) and clicking Generate. The G-

1000 v2 automatically generates a WEP key.

Entering a manual key in a Key field and selecting ASCII or Hex WEP key input

method.

WEP

Encryption

Select 64-bit WEP, 128-bit WEP or 256-bit WEP to allow data encryption.

Authentication

Method

Select Auto, Open System or Shared Key.

ASCII

Select this option in order to enter ASCII characters as the WEP keys.

HEX

Select this option to enter hexadecimal characters as the WEP keys.

The preceding “0x” is entered automatically.

Key 1 to Key 4 The WEP keys are used to encrypt data. Both the G-1000 v2 and the wireless stations

must use the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal

characters ("0-9", "A-F").

If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal

characters ("0-9", "A-F").

If you chose 256-bit WEP, then enter 29 ASCII characters or 58 hexadecimal

characters ("0-9", "A-F").

You must configure all four keys, but only one key can be activated at any one time.

The default key is key 1.

WEP

Encryption

WEP Key The WEP keys are used to encrypt data. Both the G-1000 v2 and the wireless stations

must use the same WEP key for data transmission.

If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or

256-bit WEP key respectively.

Apply Click Apply to save your changes back to the G-1000 v2.

Reset Click Reset to reload the previous configuration for this screen.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 197 198

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications G-102 Guía de usuario Pagina 56

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications G-102