
ZyXEL G-1000 v2 User’s Guide
Chapter 6 Remote Management Configuration 73
6.6.2 SNMP Traps
The G-1000 v2 will send traps to the SNMP manager when any one of the following events
occurs:
6.6.3 Configuring SNMP
To change your G-1000 v2’s SNMP settings, click Advanced > Remote MGMT > SNMP.
The screen appears as shown.
Table 28 SNMP Traps
TRAP #
TRAP NAME DESCRIPTION
0 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
1 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
6 whyReboot (defined in ZYXEL-
MIB)
A trap is sent with the reason of restart before
rebooting when the system is going to restart (warm
start).
6a For intentional reboot: A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
6b For fatal error: A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
Comentarios a estos manuales