ZyXEL Communications G-102 Guía de usuario descargar pdf (Pagina 70)

ZyXEL G-1000 v2 User’s Guide

70 Chapter 6 Remote Management Configuration

Figure 26 Remote Management: Telnet

The following table describes the labels in this screen.

6.5 Configuring FTP

You can upload and download the G-1000 v2’s firmware and configuration files using FTP,

please see the chapter on firmware and configuration file maintenance for details. To use this

feature, your computer must have an FTP client.

To change your G-1000 v2’s FTP settings, click Advanced > Remote MGMT > FTP tab.

The screen appears as shown.

Table 26 Remote Management: Telnet

LABEL

DESCRIPTION

Port You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Server Access Select the interface(s) through which a computer may access the G-1000 v2 using

this service.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 v2 using this service.

Select All to allow any computer to access the G-1000 v2 using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the G-1000 v2 using this service.

Apply Click Apply to save your customized settings and exit this screen.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 197 198

Sin comentarios

ZyXEL Communications G-102 Guía de usuario Pagina 70