ZyXEL Communications G-102 Guía de usuario descargar pdf (Pagina 58)

ZyXEL G-1000 v2 User’s Guide

58 Chapter 4 Wireless LAN

4.4.5 WPA(2) Authentication Screen

In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under

Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.

Figure 19 Wireless: WPA(2)

Group Key Update

Timer (In

Seconds)

The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK

key management) or RADIUS server (if using WPA(2) key management) sends a

new group key out to all clients. The re-keying process is the WPA(2) equivalent of

automatically changing the WEP key for an AP and all stations in a WLAN on a

periodic basis. Setting of the Group Key Update Timer is also supported in

WPA(2)-PSK mode. The G-1000 v2 default is 1800 seconds (30 minutes).

Apply Click Apply to save your changes back to the G-1000 v2.

Reset Click Reset to reload the previous configuration for this screen.

Table 19 Wireless: WPA(2)-PSK

LABEL DESCRIPTION

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 197 198

Sin comentarios

ZyXEL Communications G-102 Guía de usuario Pagina 58