ZyXEL Communications Prestige 642M series Guía de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 155
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
Prestige 642 ADSL Internet Access Router
2-9
Hardware Installation & Setup
Table 2-4 General Setup Menu Fields
Field Description Example
System Name Choose a descriptive name for identification purposes. This name can be
up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “-” and underscores "_" are accepted.
P642
Location (optional)
Enter the geographic location (up to 31 characters) of your Prestige.
MyHouse
Contact Person's
Name (optional)
Enter the name (up to 30 characters) of the person in charge of this
Prestige.
JohnDoe
Protocols: Press the [SPACE-BAR] to toggle on or off routing for the individual
protocols.
Route IP
Set this field to
Yes
to enable IP routing. You must enable IP routing for
Internet access.
Yes/No
Route IPX
Set this field
Yes
to enable IPX routing.
Yes/No
Bridge Turn on/off bridging for protocols not supported (e.g., SNA) or not turned
on in the previous Route fields.
Yes/No
2.10 Ethernet Setup
This section describes how to configure the Ethernet using
Menu 3 – Ethernet Setup
. From the Main
Menu, enter 3 to open Menu 3.
Figure 2-10 Menu 3 - Ethernet Setup
2.10.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom
need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic
and prevent security breaches.
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
3. Novell IPX Setup
4. Bridge Setup
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 154 155

Comentarios a estos manuales

Sin comentarios