ZyXEL Communications Prestige 642M series Guía de usuario descargar pdf (Pagina 89)

Prestige 642 ADSL Internet Access Router

6-4 IPX Configuration

6.3 IPX Ethernet Setup

From

Menu 3 - Ethernet Setup

, enter 3 to go to

Menu 3.3 - Novell IPX Ethernet Setup

as shown in the

figure below.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following table describes the Novell IPX Ethernet Setup Menu.

Table 6-1 Novell IPX Ethernet Setup Fields

Field Description Options

Seed Router Determine if your Prestige 642 is to act as a seed

router.

Yes/No

Frame Type Enable/Disable the individual frame type.

Remember to enable only the ones that are actually

used on your network.

802.2

802.3

Ethernet

SNAP

IPX Network

If your Prestige 642 is a seed router, enter a unique

network number for each frame type enabled.

Press [ENTER] at the message [Press ENTER to Confirm ...] to save your

configuration, or press [Esc] at any time to cancel.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 154 155

Sin comentarios

ZyXEL Communications Prestige 642M series Guía de usuario Pagina 89