
Prestige 642 ADSL Internet Access Router
5-8 Remote Node TCP/IP Configuration
Address your Prestige that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your Prestige; over WAN,
the gateway must be the IP address of one of the remote nodes.
Metric The metric represents the “cost” of transmission for routing purposes. IP
routing uses hop count as the measurement of cost, with a minimum of 1 for
directly connected networks. Enter a number that approximates the cost for
this link. The number need not be precise, but it must be between 1 and 15. In
practice, 2 or 3 is usually a good number.
Private This parameter determines if the Prestige will include the route to this remote
node in its RIP broadcasts. If set to
Yes
, this route is kept private and not
included in RIP broadcast. If
No
, the route to this remote node will be
propagated to other hosts through RIP broadcasts.
Comentarios a estos manuales