ZyXEL Communications X6004 Guía de usuario descargar pdf (Pagina 21)

X6004 CLI Reference Guide

CHAPTER 3

Network Commands

This chapter describes the commands used to configure the network settings on the X6004.

3.1 DDNS Commands

This section describes the commands used to configure dynamic DNS settings on the X6004.

The following table describes commands related to the log functions on the X6004.

3.1.1 DDNS Command Examples

This example:

• Enables DDNS.

• Specifies the domain name assigned to the X6004 by your DDNS provider.

• Specifies the username (ddnsuser) and password (ddnspass) as provided by the DDNS

provider.

Table 5 DDNS Commands

COMMAND

DESCRIPTION

network ddns update Updates DDNS (Dynamic DNS) settings on the remote

DDNS server.

network ddns set enableddns <on|off> Enables or disables DDNS.

network ddns set host <ddns_host> Specifies the domain name assigned to the X6004 by your

DDNS provider.

network ddns set mail_exchanger

<exchange-server|off>

Specifies the domain name or IP address of the email

exchange server in your organization or disables the

registration of the email server with the DDNS provider.

network ddns set service-type

<dyndns|dyndns-static|dyndns-custom>

Specifies the DDNS service type that you are registered for

with your DDNS provider.

network ddns set user

<ddns_user>:<ddns_password>

Specifies the DDNS username and password assigned to

your by your DDNS provider.

network ddns set wildcard <on|off> Enables DynDNS wildcard option on the X6004.

network ddns show Displays DDNS configuration on the X6004.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 117 118

Sin comentarios

ZyXEL Communications X6004 Guía de usuario Pagina 21