ZyXEL Communications X6004 Guía de usuario descargar pdf (Pagina 51)

X6004 CLI Reference Guide

CHAPTER 9

Outbound Line Group

Commands

This chapter shows you how to manage outside lines via commands.

9.1 Outbound Line Group Commands

The following table summarizes commands related to the outbound line group configuration

on the X6004.

Table 25 Outbound Line Group Commands

COMMAND DESCRIPTION

pbx outbound outbound_line_group add

Adds an FXO trunk to the specified X6004.

pbx outbound outbound_line_group del

bygroupid <group_id>

Deletes an FXO trunk with the specified group ID.

pbx outbound outbound_line_group del

byname <name>

Deletes an FXO trunk with the specified name.

pbx outbound outbound_line_group set

applyaa bygroupid <group_id> <name>

Specifies an auto-attendant for the FXO trunk identified by

the group ID.

Note: Group ID is automatically assigned by the

X6004 to each FXO trunk you create. The

format of group ID is og_XXX. Where

XXX is the sequential number in which

the FXO trunk was created. og_001 is

given to the first FXO trunk, og_002 is

given to the second and so on.

pbx outbound outbound_line_group set

applyaa byname <name> <name>

Specifies an auto-attendant for the FXO trunk identified by

the FXO trunk name.

pbx outbound outbound_line_group set

description bygroupid <group_id>

Sets a description for the FXO trunk identified by group ID.

pbx outbound outbound_line_group set

description byname <name> <description>

Sets a description for the FXO trunk identified by FXO trunk

name.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 117 118

Sin comentarios

ZyXEL Communications X6004 Guía de usuario Pagina 51