ZyXEL Communications X6004 Guía de usuario descargar pdf (Pagina 28)

Chapter 4 SIP Server Commands

X6004 CLI Reference Guide

4.4 DSP Management Commands

The following table describes commands related to Digital Signal Processing (DSP)

management on the X6004.

4.4.1 DSP Management Command Examples

This example:

• Reserves 6 DSP channels for conference calling on the X6004.

" The resource reservation takes place once there are no active calls on the

system.

• Displays the DSP channel configuration for the X6004.

Table 12 DSP Management Commands

COMMAND DESCRIPTION

pbx server dsp set mid <mid> conf <dsp-

channels>

Specifies the number of DSP channels to reserve for

conference calling.

mid: IPPBX_001, IPPBX_002, ...

dsp-channels: integer specifying a number of DSP

channels.

pbx server dsp show all Displays the DSP channel configuration for all members of

a ZyStack.

pbx server dsp show mid <mid> Displays the DSP channel configuration for the X6004.

> pbx server dsp set mid IPPBX_001 conf 6

SI3215: si3215lm_close

SI3050: fxo close

The DSP resource reservation will be applied as all ongoing calls are

terminated.

> pbx server dsp show mid IPPBX_001

/config/ZyStack/IPPBX_001/DSPmanage.conf

[ IPPBX_001 DSP Info. ]

Total available = 21

FXO = 4

FXS = 4

SIP trunk = 2

Conference =6

Share = 5

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 117 118

Sin comentarios

ZyXEL Communications X6004 Guía de usuario Pagina 28