ZyXEL Communications X6004 Guía de usuario descargar pdf (Pagina 22)

Chapter 3 Network Commands

X6004 CLI Reference Guide

• Displays DDNS settings.

3.2 Network Interface Commands

This section describes the commands used to configure the LAN and WAN port settings on

the X6004.

The following table lists the commands for this feature.

3.2.1 Network Interface Command Examples

This example:

• Sets the LAN IP address (192.168.1.10) and subnet mask (255.255.255.0).

• Sets the WAN IP address (172.16.1.201) and subnet mask (255.255.255.0).

• Sets the default gateway (172.16.1.254) for the WAN interface.

• Sets the primary DNS server (172.16.5.1) for the WAN interface.

> network ddns on

success

> network ddns set host 172.168.0.1

> network ddns set user ddnsuser:ddnspass

> network ddns show

host=172.168.0.1

interface=eth0.4000

user=ddnsuser:ddnspass

Table 6 Network Interface Commands

COMMAND

DESCRIPTION

network interface lan ip address <ip-

address> netmask <subnet-mask>

Specifies the LAN IP address and subnet mask.

network interface show ip all Displays the LAN and WAN IP address configuration on

the X6004.

network interface wan ip address <ip-

address> netmask <subnet-mask>

Specifies the WAN IP address and subnet mask.

network interface wan ip address dhcp Either disables or enables DHCP on the X6004.

network interface wan ip address dhcp

renew

Renews the IP address from the DHCP server.

network interface wan ip address static Sets the WAN IP address to static.

network interface wan ip first-dns-server

<ip-address>

Specifies the IP address of the primary DNS server.

network interface wan ip gateway <ip-

address>

Specifies the IP address of the WAN default gateway.

network interface wan ip second-dns-

server <ip-address>

Specifies the IP address of the secondary DNS server.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 117 118

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications X6004 Guía de usuario Pagina 22

Comentarios a estos manuales