ZyXEL Communications X6004 Guía de usuario descargar pdf (Pagina 91)

X6004 CLI Reference Guide

CHAPTER 20

Diagnostics Commands

This chapter covers the diagnostics commands you can execute on the X6004.

20.1 System Diagnostics Commands

The following table describes commands related to the system diagnostic functions on the

X6004.

20.1.1 System Diagnostics Command Examples

This example displays how long the X6004 has been running and the IP addresses of the LAN

and WAN interfaces:

Table 47 System Diagnostics Commands

COMMAND DESCRIPTION

diag show cpu [mid <mid>] Displays the CPU speed and the percentage utilization of

the processor’s capacity.

diag show disk [mid <mid>] Displays the percentage of total flash memory used on the

X6004.

diag show fan [mid <mid>] Displays the fan speed.

diag show ip [mid <mid>] Shows the IP addresses for the LAN and WAN interfaces

on the X6004.

diag show license [mid <mid>] Displays the number of licenses for SIP extensions and

softphones connecting to the X6004.

diag show mac [mid <mid>] Shows the MAC addresses for the LAN and WAN

interfaces on the X6004.

diag show mem [mid <mid>] Displays information about RAM.

diag show serial [mid <mid>] Displays the serial number of the X6004.

diag show time [mid <mid>] Displays the current system time on the X6004.

diag show uptime [mid <mid>] Displays system uptime.

diag show version [mid <mid>] Displays firmware version number.

diag zystack show status Displays the status of ZyStack members.

> diag show uptime mid IPPBX_001

system uptime : 1 day

> diag show ip

WAN IP : 172.23.37.201

LAN IP : 192.168.1.12

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 117 118

Sin comentarios

ZyXEL Communications X6004 Guía de usuario Pagina 91