ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Guía de usuario descargar pdf (Pagina 226)

Chapter 24 Device HA

ZyWALL (ZLD) CLI Reference Guide

226

device-ha ap-mode priority <1..254> Sets backup ZyWALL’s priority. The backup

ZyWALL with the highest value takes over the role

of the master ZyWALL if the master ZyWALL

becomes unavailable. The priority must be

between 1 and 254. (The master interface has

priority 255.)

[no] device-ha ap-mode authentication {string

key | ah-md5 key}

Sets the authentication method the virtual router

uses. Every interface in a virtual router must use

the same authentication method and password.

The no command disables authentication.

string: Use a plain text password for

authentication. key - Use up to eight characters

including alphanumeric characters, the underscore,

and some punctuation marks (+-/*= :; .! @$&%#~ ‘

\ () ).

ah-md5: Use an encrypted MD5 password for

authentication. key - Use up to eight characters

including alphanumeric characters, the underscore,

and some punctuation marks (+-/*= :; .! @$&%#~ ‘

\ () ).

[no] device-ha ap-mode interface_name manage-

ip ip subnet_mask

Sets the management IP address for an interface.

[no] device-ha ap-mode interface_name activate Has device HA monitor the status of an interface’s

connection.

[no] device-ha ap-mode master sync

authentication password password

This is for a master ZyWALL. It specifies the

password to require from synchronizing backup

ZyWALLs. Every router in the virtual router must

use the same password. The

no command sets

the password setting to blank (which means no

backups can synchronize with this master).

password: Use 4-63 alphanumeric characters,

underscores (_), dashes (-), and

#%^*={}:,.~

characters.

[no] device-ha ap-mode backup sync

authentication password password

Sets the password the backup ZyWALL uses when

synchronizing with the master. The no command

sets the password setting to blank (which means

this backup ZyWALL cannot synchronize with the

master).

password: Use 4-63 alphanumeric characters,

underscores (_), dashes (-), and

#%^*={}:,.~

characters.

[no] device-ha ap-mode backup sync auto Turns on automatic synchronization according to

the interval you specify in device-ha ap-mode

backup sync interval. The first

synchronization begins after the specified interval

(not immediately).

[no] device-ha ap-mode backup sync interval

<1..1440>

When you use automatic synchronization, this sets

how often (in minutes) the ZyWALL synchronizes

with the master.

[no] device-ha ap-mode backup sync from

master_address port port

Sets the address of the master ZyWALL with which

this backup ZyWALL is to synchronize.

master_address: The master ZyWALL’s IP

address or fully-qualified domain name (FQDN).

port: The master ZyWALL’s FTP port number.

Table 123 device-ha ap-mode Commands (continued)

COMMAND DESCRIPTION

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 385 386

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Guía de usuario Pagina 226

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1