ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Guía de usuario descargar pdf (Pagina 301)

Chapter 36 System Remote Management

ZyWALL (ZLD) CLI Reference Guide

301

36.6.1 Telnet Commands Examples

This command sets a service control rule that allowed the computers with the IP addresses

matching the specified address object to access the specified zone using Telnet service.

This command displays Telnet settings.

36.7 Configuring FTP

You can upload and download the ZyWALL’s firmware and configuration files using FTP. To

use this feature, your computer must have an FTP client.

36.7.1 FTP Commands

The following table describes the commands available for FTP. You must use the configure

terminal

command to enter the configuration mode before you can use these commands.

Router# configure terminal

Router(config)# ip telnet server rule 11 access-group RD zone LAN action

-> accept

Router# configure terminal

Router(config)# show ip telnet server status

active : yes

port : 23

service control:

No. Zone Address Action

========================================================================

Router(config)#

Table 169 Command Summary: FTP

COMMAND DESCRIPTION

[no] ip ftp server Allows FTP access to the ZyWALL. The

command disables FTP access to the ZyWALL.

[no] ip ftp server cert certificate_name Sets a certificate to be used to identify the

ZyWALL. The

no command resets the certificate

used by the FTP server to the factory default.

[no] ip ftp server port <1..65535> Sets the FTP service port number. The

command resets the FTP service port number to

the factory default (21).

[no] ip ftp server tls-required Allows FTP access over TLS. The no command

disables FTP access over TLS.

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 385 386

Sin comentarios

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Guía de usuario Pagina 301