
ZyXEL NWA-1100 User’s Guide
135
APPENDIX A
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware features.
Table 45 Hardware Specifications
Power Specification 12 V DC, 1 A
Reset button Returns all settings to their factory defaults.
Ethernet Port • Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-
duplex mode.
• Auto-crossover: Use either crossover or straight-through Ethernet
cables.
Power over Ethernet
(PoE)
IEEE 802.3af compliant.
Antenna SMA antenna connectors, equipped by default with 3dBi omni antenna, 60°
Operation Temperature 0 ~ 50 º C
Storage Temperature -30 ~ 60 º C
Operation Humidity 20 ~ 90 % (non-condensing)
Storage Humidity 10 ~ 90 % (non-condensing)
Dimensions 152mm x 92mm x 45mm
Table 46 Firmware Specifications
Default IP Address 192.168.1.2
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Wireless LAN Standards IEEE 802.11b, IEEE 802.11g
Wireless security WEP, WPA(2), WPA(2)-PSK, 802.1x
STP (Spanning Tree
Protocol) / RSTP (Rapid
STP)
(R)STP detects and breaks network loops and provides backup links
between switches, bridges or routers. It allows a bridge to interact with
other (R)STP-compliant bridges in your network to ensure that only one
path exists between any two stations on the network.
WMM QoS WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you to prioritize
wireless traffic.
Certificates The ZyXEL Device can use certificates (also called digital IDs) to
authenticate users. Certificates are based on public-private key pairs.
Certificates provide a way to exchange public keys for use in
authentication.
Comentarios a estos manuales