Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Chapter 3 Status Screens
ZyXEL NWA-1100 User’s Guide
41
3.1.1 System Statistics Screen
Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry
Count and FCS Error Count. Also provided is the "poll interval". The Poll Interval field is
configurable. The fields in this screen vary according to the current wireless mode of each
WLAN adaptor.
Click Status > Show Statistics. The following screen pops up.
Figure 12 System Status: Show Statistics
The following table describes the labels in this screen.
LAN This field displays the number of wireless clients currently associated to
the first wireless module. Each wireless module supports up to 32
concurrent associations.
WLAN This field displays the number of wireless clients currently associated to
the second wireless module. Each wireless module supports up to 32
concurrent associations.
System Status
Statistics Click this link to view port status and packet specific statistics. See Section
3.1.1 on page 41.
Association List Click this to see a list of wireless clients currently associated to each of the
ZyXEL Device’s wireless modules. See Section 14.4 on page 121.
View Log Click this to see a list of logs produced by the ZyXEL Device. See Chapter
13 on page 115.
Table 2 The Status Screen
LABEL DESCRIPTION
Table 3 System Status: Show Statistics
LABEL DESCRIPTION
Description
802.11 Mode This field shows which mode (802.11b Only, 802.11g Only, 802.11b+g) the
ZyXEL Device is using.
Channel ID Click this to see which wireless channels are currently in use in the local area.
See Section 14.5 on page 122.
RX PKT This is the number of received packets on this port.
TX PKT This is the number of transmitted packets on this port.
Retry Count This is the total number of retries for transmitted packets (TX).
FCS Error This is the ratio percentage showing the total number of checksum error of
received packets (RX) over total RX.
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 205 206

Comentarios a estos manuales

Sin comentarios