Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario descargar pdf (Pagina 187)

ZyXEL NWA-1100 User’s Guide

187

APPENDIX I

How to Access and Use the CLI

This chapter introduces the command line interface (CLI).

Accessing the CLI

Use Telnet to access the CLI.

1 Connect your computer to one of the Ethernet ports.

2 Open a Telnet session to the ZyXEL Device’s IP address. If this is your first login, use

the default values.

Make sure your computer IP address is in the same subnet, unless you are accessing the

ZyXEL Device through one or more routers. In the latter case, make sure remote

management of the ZyXEL Device is allowed via Telnet.

Logging in

Use the administrator username and password. If this is your first login, use the default values.

in some ZyXEL Device models you may not need to enter the user name.

The ZyXEL Device automatically logs you out of the management interface after five minutes

of inactivity. If this happens, simply log back in again. Use the sys stdio set command

to extend the idle timeout. For example, the ZyXEL Device automatically logs you out of the

management interface after 60 minutes of inactivity after you use the sys stdio set 60

command. Use the sys stdio show command to display the current idle timeout setting.

Table 73 Default Management IP Address

SETTING DEFAULT VALUE

IP Address 192.168.1.1

Subnet Mask 255.255.255.0

Table 74 Default User Name and Password

SETTING DEFAULT VALUE

User Name admin

Password 1234

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 205 206

Sin comentarios

Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario Pagina 187