Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario descargar pdf (Pagina 85)

Chapter 7 Wireless Security Screen

ZyXEL NWA-1100 User’s Guide

7.4.5 Security: WPA2 or WPA2-MIX

This screen varies depending on whether you select Access Point or Wireless Client in the

Wireless > Wireless Settings screen.

7.4.5.1 Access Point

Use this screen to use WAP2 or WPA2-MIX as the security mode for your ZyXEL Device that

is in Access Point operating mode. Select WPA2 or WPA2-MIX in the Security Mode field

to display the following screen.

Figure 39 Security:WPA2 or WPA2-MIX for Access Point

The following table describes the labels not previously discussed

Apply Click Apply to save your changes.

Reset Click Reset to begin configuring this screen afresh.

Table 21 Security: WPA for Wireless Client

LABEL DESCRIPTION

Table 22 Security: WPA2 or WPA2-MIX for Access Point

LABEL DESCRIPTIONS

Security Mode Choose WPA2 or WPA2-MIX in this field.

ReAuthentication

Timer

Specify how often wireless stations have to resend usernames and passwords in

order to stay connected.

Enter a time interval between 10 and 9999 seconds. The default time interval is

1800 seconds (30 minutes). Alternatively, enter “0” to turn reauthentication off.

Note: If wireless station authentication is done using a

RADIUS server, the reauthentication timer on the

RADIUS server has priority.

Group Key

Update Timer

The Group Key Update Timer is the rate at which the AP sends a new group key

out to all clients. The re-keying process is the WPA equivalent of automatically

changing the group key for an AP and all stations in a WLAN on a periodic basis.

Setting of the Group Key Update Timer is also supported in WPA-PSK mode.

The ZyXEL Device‘s default is 3600 seconds (or 1 hour).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 205 206

Sin comentarios

Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario Pagina 85