Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario descargar pdf (Pagina 81)

Chapter 7 Wireless Security Screen

ZyXEL NWA-1100 User’s Guide

Figure 35 Security: 802.1x Only for Wireless Client

The following table describes the labels in this screen.

7.4.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

Use this screen to use 802.1x Static 64 or 802.1x Static 128 security mode for your ZyXEL

Device. Select 802.1x Static 64 or 802.1x Static 128 in the Security Mode field to display the

following screen.

Table 18 Security: 802.1x Only for Wireless Client

LABEL DESCRIPTION

Security Mode Choose the same security mode used by the AP.

Data Encryption Select between None and Dynamic WEP. Refer to Section on page 161 for

information on using Dynamic WEP.

IEEE802.1x

Authentication

EAP Type The options on the left refer to EAP methods. You can choose either TLS, LEAP,

PEAP or TTLS. The default value is PEAP.

The options on the right refer to authentication protocols. You can choose

between MSCHAPv2 and GTC.The default value is MSCHAPv2.

User Information

Username Supply the username of the account created in the RADIUS server.

Password Supply the password of the account created in the RADIUS server.

Apply Click Apply to save your changes.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 205 206

Sin comentarios

Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario Pagina 81