Zyxel-communications 802.11b/g Wireless Access Point NWA-1100 Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Chapter 3 Status Screens
ZyXEL NWA-1100 User’s Guide
40
Device Name This field displays the ZyXEL Device system name. It is used for
identification. You can change this in the System > General screen’s
Device Name field.
Operation Mode This field displays the current operating mode of the first wireless module
(AP, Wireless Client, Bridge or AP+Bridge). You can change the
operating mode in the Wireless > Wireless Settings screen.
MAC Address This displays the MAC (Media Access Control) address of the ZyXEL
Device on the LAN. Every network device has a unique MAC address
which identifies it across the network.
Firmware Version This field displays the current version of the firmware inside the device. It
also shows the date the firmware version was created. You can change the
firmware version by uploading new firmware in Maintenance > F/W
Upload.
Ethernet Information
IP Address This field displays the current IP address of the ZyXEL Device on the
network.
Subnet Mask Subnet masks determine the maximum number of possible hosts on a
network. You can also use subnet masks to divide one network into
multiple sub-networks.
Gateway IP Address This is the IP address of the gateway. The gateway is a router or switch on
the same network segment as the device's LAN port. The gateway helps
forward packets to their destinations.
WLAN Information
SSID This field displays the SSID (Service Set Identifier).
Channel The channel or frequency used by the ZyXEL Device to send and receive
information.
MAC Filter Media Access Control filtering checks incoming frames based on MAC
(Media Access Control) address(es) that you specify.
Security Mode This displays the security mode the ZyXEL Device is using.
System Resources
System Up Time This field displays the elapsed time since the ZyXEL Device was turned on.
CPU Usage This field displays what percentage of the ZyXEL Device’s processing
ability is currently being used. The higher the CPU usage, the more likely
the ZyXEL Device is to slow down.
Memory Usage This field displays what percentage of the ZyXEL Device’s volatile memory
is currently in use. The higher the memory usage, the more likely the
ZyXEL Device is to slow down. Some memory is required just to start the
ZyXEL Device and to run the web configurator.
Interface Status
Interface This column displays each interface of the ZyXEL Device.
Status This field indicates whether or not the ZyXEL Device is using the interface.
For each interface, this field displays Up when the ZyXEL Device is using
the interface and Down when the ZyXEL Device is not using the interface.
Channel Click this to see which wireless channels are currently in use in the local
area. See Section 14.5 on page 122.
Rate For the LAN port this displays the port speed and duplex setting.
For the WLAN interface, it displays the downstream and upstream
transmission rate or N/A if the interface is not in use.
Table 2 The Status Screen
LABEL DESCRIPTION
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 205 206

Comentarios a estos manuales

Sin comentarios