Zyxel-communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario descargar pdf (Pagina 210)

P-793H User’s Guide

210 Chapter 15 Remote Management Configuration

15.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and

vice versa. Refer to the chapter on LAN for background information.

See Section 15.1 on page 203 for background information. Click Advanced > Remote

MGMT > DNS. The screen appears as shown. Use this screen to set from which IP address

the ZyXEL Device will accept DNS queries and on which interface it can send them your

ZyXEL Device’s DNS settings.

Figure 101 Remote MGMT > DNS

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify

to access the ZyXEL Device using this service.

SNMP Configuration

Get Community Enter the Get Community, which is the password for the incoming Get and

GetNext requests from the management station. The default is public and allows

all requests.

Set Community Enter the Set community, which is the password for incoming Set requests

from the management station. The default is public and allows all requests.

Trap Community Type the trap community, which is the password sent with each trap to the

SNMP manager. The default is public and allows all requests.

Trap Destination Type the IP address of the station to send your SNMP traps to.

Apply Click Apply to save your customized settings and exit this screen.

Cancel Click Cancel to begin configuring this screen afresh.

Table 75 Remote MGMT > SNMP (continued)

LABEL DESCRIPTION

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 431 432

Sin comentarios

Zyxel-communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario Pagina 210