
P-793H User’s Guide
258 Chapter 23 WAN Setup
23.4 Configuring Dial Backup in Menu 2
From the main menu, enter 2 to open menu 2.
Figure 140 Menu 2.2: Dial Backup Setup
The following table describes the fields in this menu.
23.5 Advanced Dial Backup Setup
Note: Consult the manual of the device connected to your Dial Backup port for
specific AT commands.
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced
Setup field in Menu 2.2 - Dial Backup Setup, press the [SPACE BAR] to select Yes and
then press [ENTER].
Menu 2.2 - Dial Backup Setup
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Table 95 Menu 2.2: Dial Backup Setup
FIELD DESCRIPTION
Dial-Backup:
Active Use this field to turn the dial-backup feature on (Yes) or off (No).
Port Speed Press [SPACE BAR] and then press [ENTER] to select the speed of the connection
between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
AT Command
String:
Init Enter the AT command string to initialize the WAN device. Consult the manual of your
WAN device connected to your Dial Backup port for specific AT commands.
Edit Advanced
Setup
To edit the advanced setup for the Dial Backup port, move the cursor to this field;
press the [SPACE BAR] to select Yes and then press [ENTER] to go to Menu 2.1 -
Advanced Setup.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Comentarios a estos manuales