
P-793H User’s Guide
352 Chapter 36 IP Routing Policy Setup
36.6 IP Routing Policy
Use this menu to configure policy routes. To open this menu, select Edit and enter the
appropriate rule number in menu 25.
Figure 234 Menu 25.1.1: IP Routing Policy
The following table describes the labels in this menu.
MT Maximum Throughput
MR Maximum Reliability
MC Minimum Cost
Table 129 Menu 25: IP Routing Policy Setup, Abbreviations (continued)
ABBREVIATION MEANING
Menu 25.1.1 - IP Routing Policy
Policy Set Name= ex1
Active= No
Criteria:
IP Protocol = 0
Type of Service= Don't Care Packet length= 0
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Action= Matched
Gateway addr = 0.0.0.0 Log= No
Type of Service= No Change
Precedence = No Change
Table 130 Menu 25.1.1: IP Routing Policy
FIELD DESCRIPTION
Policy Set Name This is the descriptive name of the routing policy selected in Menu 25.1 - IP
Routing Policy Summary.
Active Press [SPACE BAR] and then [ENTER] to select Yes to activate the policy.
Criteria
IP Protocol Enter a number that represents an IP layer 4 protocol, for example, UDP=17,
TCP=6, ICMP=1 and Don't care=0.
Type of Service Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput or Max Reliable.
Precedence Precedence value of the incoming packet. Press [SPACE BAR] and then
[ENTER] to select a value from 0 to 7 or Don't Care.
Comentarios a estos manuales