Zyxel-communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario descargar pdf (Pagina 293)

100

101

P-793H User’s Guide

Chapter 28 NAT Setup 293

Figure 171 NAT Example 3

1 In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address

Mapping Sets. Therefore you must choose the Full Feature option from the Network

Address Translation field (in menu 4 or menu 11.3) in Figure 172 on page 293.

2 Then enter 15 from the main menu.

3 Enter 1 to configure the Address Mapping Sets.

4 Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and

then enter 1 for the Select Rule field. Press [ENTER] to confirm.

5 Select Type as One-to-One (direct mapping for packets going both ways), and enter the

local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as

10.132.50.1 (our first IGA). (See Figure 173 on page 294).

6 Repeat the previous step for rules 2 to 4 as outlined above.

7 When finished, menu 15.1.1 should look like as shown in Figure 174 on page 294.

Figure 172 Example 3: Menu 11.3

The following figure shows how to configure the first rule.

Menu 11.3 - Remote Node Network Layer Options

IP Options: Bridge Options:

IP Address Assignment = Dynamic Ethernet Addr Timeout(min)= N/A

Rem IP Addr = 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= N/A

NAT= SUA Only

Address Mapping Set= N/A

Metric= 2

Private= No

RIP Direction= None

Version= RIP-1

Multicast= None

IP Policies=

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 431 432

Comentarios a estos manuales

Sin comentarios

Zyxel-communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario Pagina 293

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications G.SHDSL.bis 4-port Security Gateway P-793H