ZyXEL Communications ES-315-F - V3.70 Guía de usuario descargar pdf (Pagina 315)

GS-4012F/4024 User’s Guide

314 Chapter 45 Interface Commands

• Enable port mirroring.

• Enable the monitor port 3.

• Enable ports 1, 4, 5 and 6 for configuration.

• Enable port mirroring on the ports.

• Enable port mirroring for outgoing traffic. Traffic is copied from ports 1, 4, 5 and 6 to

port three in order to examine it in more detail without interfering with the traffic flow on

the original ports.

45.2.6 gvrp

Syntax:

gvrp

GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for

switches to register necessary VLAN members on ports across the network. Enable this

function to permit VLAN groups beyond the local switch.

An example is shown next.

• Enable the IEEE 802.1Q tagged VLAN command to configure tagged VLAN for the

switch.

• Enable ports one, three, four and five for configuration.

• Enable GVRP on the interface.

45.2.7 ingress-check

The ingress-check command enables the device to discard incoming frames for VLANs

that do not have this port as a member.

Syntax:

ingress-check

An example is shown next.

• Enable ports 1, 3, 4 and 5 for configuration.

sysname(config)# mirror-port

sysname(config)# mirror-port 3

sysname(config)# interface port-channel 1,4-6

sysname(config-interface)# mirror

sysname(config-interface)# mirror dir egress

sysname(config)# vlan1q gvrp

sysname(config)# interface port-channel 1,3-5

sysname(config-interface)# gvrp

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 362 363

Sin comentarios

ZyXEL Communications ES-315-F - V3.70 Guía de usuario Pagina 315