ZyXEL Communications ES-315-F - V3.70 Guía de usuario Pagina 319

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 363
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 318
GS-4012F/4024 User’s Guide
318 Chapter 45 Interface Commands
An example is shown next.
Select ports 3-6 for internal loopback test.
Execute the test command.
View the results.
45.3 Interface no Command Examples
Similar to the no commands in the Enable and Config modes, the no commands for the
Interface sub mode also disable certain features. In this mode, however, this takes place on a
port by port basis.
45.3.1 no bandwidth-limit
You can disable bandwidth limit on port 1 simply by placing the no command in front of the
bandwidth-limit command.
Syntax:
no bandwidth-limit
An example is shown next:
Disable bandwidth limit on port1
sysname(config)# interface port-channel 3-6
sysname(config-interface)# test 3-6
Testing internal loopback on port 3 :Passed!
Ethernet Port 3 Test ok.
Testing internal loopback on port 4 :Passed!
Ethernet Port 4 Test ok.
Testing internal loopback on port 5 :Passed!
Ethernet Port 5 Test ok.
Testing internal loopback on port 6 :Passed!
Ethernet Port 6 Test ok.
sysname(config)# interface port-channel 1
sysname(config-interface)# no bandwidth-limit
Vista de pagina 318
1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 362 363

Comentarios a estos manuales

Sin comentarios