ZyXEL Communications ES-315-F - V3.70 Guía de usuario Pagina 318

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 363
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 317
GS-4012F/4024 User’s Guide
Chapter 45 Interface Commands 317
45.2.12 name
Syntax:
name <port-name-string>
where
An example is shown next.
Enable port one for configuration.
Set a name for the port.
45.2.13 speed-duplex
Syntax:
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
where
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the speed to 100 Mbps in half duplex mode.
45.2.14 test
You can perform an interface loopback test on specified ports. The test returns Passed! or
Failed!
<port-name-string>
= Sets a name for your port interface.
sysname(config)# interface port-channel 1
sysname(config-interface)# name Test
<auto|10-half|10-
full|100-half|100-
full|1000-full>
= Sets the duplex mode (half or full) and speed (10, 100 or 1000
Mbps) of the connection on the port. Selecting auto (auto-
negotiation) makes one port able to negotiate with a peer
automatically to obtain the connection speed and duplex mode
that both ends support.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# speed-duplex 100-half
Vista de pagina 317
1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 362 363

Comentarios a estos manuales

Sin comentarios