ZyXEL Communications ES-315-F - V3.70 Guía de usuario Pagina 324

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 363
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 323
GS-4012F/4024 User’s Guide
Chapter 46 IEEE 802.1Q Tagged VLAN Commands 323
46.3.4 Modify Static VLAN
Use the following commands in the config-vlan mode to configure the static VLAN table.
Syntax:
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
where
•Enter
fixed to register the <port-list> to the static VLAN table with <vlan-id>.
•Enter
normal to confirm registration of the <port-list> to the static VLAN table with
<vlan-id>.
•Enter
forbidden to block a <port-list> from joining the static VLAN table with
<vlan-id>.
•Enter
no fixed or no forbidden to change <port-list> to normal status.
•Enter
untagged to send outgoing frames without a tag.
•Enter
no untagged to tag outgoing frames.
46.3.4.1 Modify a Static VLAN Table Example
The following example configures ports 1 to 5 as fixed and untagged ports in VLAN 2000.
46.3.4.2 Forwarding Process Example
46.3.4.2.1 Tagged Frames
1 First the switch checks the VLAN ID (VID) of tagged frames or assigns temporary VIDs
to untagged frames.
2 The switch then checks the VID in a frame’s tag against the SVLAN table.
<vlan-id>
= The VLAN ID [1 – 4094].
<name-str>
= A name to identify the SVLAN entry.
<port-list>
= This is the switch port list.
sysname (config)# vlan 2000
sysname (config-vlan)# fixed 1-5
sysname (config-vlan)# untagged 1-5
Vista de pagina 323
1 2 ... 319 320 321 322 323 324 325 326 327 328 329 ... 362 363

Comentarios a estos manuales

Sin comentarios