
Chapter 2 Introducing the Web Configurator
P-663H-51 User’s Guide
34
Table 2 Web Configurator Screens Summary
LINK/ICON SUB-LINK FUNCTION
Device Info
Summary This screen shows general device information such as the
firmware version, line rates, LAN IP address, default gateway,
and DNS servers.
WAN This screen displays information about the ZyXEL Device’s
WAN connections.
Statistics LAN This screen displays statistics about the ZyXEL Device’s LAN
connections.
WAN This screen displays statistics about the ZyXEL Device’s WAN
connections.
ATM This screen shows low-level ATM protocol statistics.
ADSL This screen displays statistics about the ZyXEL Device’s
ADSL connection.
Route This screen displays information about the ZyXEL Device’s
routes for sending traffic.
ARP This screen displays the IP addresses and MAC addresses
that the ZyXEL Device has resolved.
DHCP This screen lists the ZyXEL Device’s DHCP clients.
Advanced Setup
WAN Use these screens to view and configure the ZyXEL Device’s
WAN (Internet) connection settings.
LAN Use this screen to configure LAN settings and the DHCP
server.
NAT Virtual Servers Use this screen to configure NAT virtual server (port
forwarding) entries to have the ZyXEL Device forward traffic
from the WAN to LAN computers.
Port Triggering Use this screen to change your ZyXEL Device’s port triggering
settings.
DMZ Host Use this screen to configure a DMZ host IP address to receive
packets from ports that are not specified in the virtual server
configuration.
Security IP Filtering Configure outgoing IP filtering to block LAN users or
applications from accessing the Internet. Configure incoming
IP filtering to allow certain traffic to come in from the Internet to
the LAN.
MAC Filtering Configure the MAC filter to block or allow access based on
MAC addresses.
Parental Control Configure days and times to block Internet access from
specific MAC addresses.
Quality of
Service
Use the first QoS screen to enable or disable QoS, and select
a DSCP mark to use on all outgoing packets that do not match
a QoS classification rule.
Queue Config This screen lists the QoS queues. A QoS queue sets the
priority used for incoming packets that the QoS classifier has
grouped into a flow.
QoS
Classifications
Configure QoS classifiers to group upstream traffic into data
flows according to specific criteria.
Comentarios a estos manuales