ZyXEL Communications P-663HN-51 Guía de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 202
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Chapter 4 Device Information
P-663H-51 User’s Guide
40
4.2 WAN Information
Click Device Info > WAN to open the following screen. Each row in the table displays
information about one of the ZyXEL Device’s WAN connections.
Figure 12 Device Info > WAN
The following table describes the labels in this screen.
Primary DNS
Server
This is the IP address of the server that the ZyXEL Device tries to use first when it
needs to resolve a domain name (find the numeric IP address associated with the
domain name).
Secondary DNS
Server
If the primary server does not respond when the ZyXEL Device tries to resolve a
domain name, the ZyXEL Device tries the server displayed in this field.
Table 3 Device Info > Summary
LABEL DESCRIPTION
Table 4 Device Info > WAN
LABEL DESCRIPTION
Port/VPI/VCI This field displays the WAN connection’s DSL port, Virtual Path Identifier, and Virtual
Channel Identifier. The DSL port is always 0 because the DSL ports are bonded into
a single logical port.
VLAN Mux. This field shows whether or not VLAN multiplexing is enabled. VLAN multiplexing
allows multiple separate WAN connections within the same PVC.
Con. ID This is the number of the WAN connection.
Category This is the ATM traffic class the WAN connection is using.
Service This displays the connection type, DSL port, Virtual Path Identifier, and Virtual
Channel Identifier. For the connection types, pppoe stands for PPPoE, ipoa stands
for IPoA, pppoa stands for PPPoA, mer stands for MAC Encapsulated Routing, and
br stands for bridging.
Interface This field displays the name of the WAN connection, followed by the DSL port, Virtual
Path Identifier, and Virtual Channel Identifier.
Protocol This is the type of network protocol the WAN interface is using for IP over Ethernet.
IGMP This is whether or not the WAN connection is using IGMP multicast (if available).
QoS This is whether or not packet level QoS is enabled for the WAN connection.
State This is whether or the WAN connection is enabled.
Status This is the WAN connection’s current ADSL line state.
IP Address This is the WAN connection’s IP address.
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 201 202

Comentarios a estos manuales

Sin comentarios