
ZyAIR Wireless Gateway Series User’s Guide
10-2 Static Route
Figure 10-2 IP Static Route Summary
The following table describes the labels in this screen.
Table 10-1 IP Static Route Summary
LABEL DESCRIPTION
# This field displays an individual static route index number.
Name This field displays the name that describes or identifies this route.
Active
This field shows whether this static route is active (Yes) or not (No).
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your ZyAIR that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your ZyAIR; over the WAN, the
gateway must be the IP address of one of the remote nodes.
Edit To set up a static route on the ZyAIR, click the radio button next to the static route
index number you want to configure, then click Edit to go to the Static Route -Edit
screen.
Comentarios a estos manuales