ZyXEL Communications PLA-400 V2 - V3.0.5 Guía de usuario Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
ZyAIR Wireless Gateway Series User’s Guide
19-2 LAN Setup
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.
19.2 TCP/IP Ethernet and DHCP Setup
Use menu 3.2 to configure your ZyAIR for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3-Ethernet Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2-TCP/IP and DHCP Ethernet Setup, as shown next
:
Figure 19-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server TCP/IP Setup:
Client IP Pool:
Starting Address= 192.168.1.33 IP Address= 192.168.1.1
Size of Client IP Pool= 32 IP Subnet Mask= 255.255.255.0
First DNS Server= From ISP RIP Direction= Both
IP Address= N/A Version= RIP-1
Second DNS Server= From ISP Multicast= None
IP Address= N/A Edit IP Alias= No
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
First address in
the IP pool
Size of the IP
pool
This is the IP
address of the
ZyAIR.
IP addresses
of the DNS
servers
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 395 396

Comentarios a estos manuales

Sin comentarios