ZyXEL Communications PLA-400 V2 - V3.0.5 Guía de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
ZyAIR Wireless Gateway Series User’s Guide
Wizard Setup 3-15
Table 3-8 Wizard 4: WAN and DNS
LABEL DESCRIPTION
My WAN IP Subnet
Mask
Enter the IP subnet mask in this field if you selected Use Fixed IP Address.
This field is not available when you select PPPoE encapsulation in the previous
wizard screen.
Gateway IP Address
Enter the gateway IP address in this field if you selected Use Fixed IP
Address. This field is not available when you select PPPoE encapsulation in
the previous wizard screen.
DNS Server Address Assignment
Get automatically from
ISP
Select this option if your ISP does not give you DNS server addresses. This
option is selected by default.
Use fixed IP address -
DNS Server IP Address
Select this option If your ISP provides you a DNS server address.
Primary/Secondary
DNS Server
If you selected the Use fixed IP address – Primary/Secondary DNS Server
option, enter the provided DNS addresses in these fields.
WAN MAC Address: The MAC address field allows you to configure the WAN port's MAC address by
either using the factory default or cloning the MAC address from a workstation on your LAN.
Factory Default Select this option to use the factory assigned default MAC address.
Spoof this Computer's
MAC address - IP
Address
Select this option and enter the IP address of the computer on the LAN whose
MAC address you are cloning. Once it is successfully configured, the MAC
address will be copied to the rom file (ZyNOS configuration file). It will not
change unless you change the setting or upload a different rom file. It is
advisable to clone the MAC address from a computer on your LAN even if your
ISP does not presently require MAC address authentication.
Back
Click Back to return to the previous screen.
Next
Click Next to continue.
3.6 Basic Setup Complete
Click Finish to complete and save the wizard setup.
If you are currently using a wireless (LAN) adapter to access this ZyAIR and you made changes to the
ESSID, then you will need to make the same changed to your wireless (LAN) adapter after you click the
Finish button.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 395 396

Comentarios a estos manuales

Sin comentarios