ZyXEL Communications PLA-400 V2 - V3.0.5 Guía de usuario Pagina 143

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 396
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 142
ZyAIR Wireless Gateway Series User’s Guide
Firewall Screens 12-5
Figure 12-2 WAN to LAN Traffic
12.5 Enabling Firewall
The ordering of your rules is very important as rules are applied in turn.
The default rules allow LAN-to-WAN traffic and deny traffic initiated from WAN-to-LAN. You may block
traffic initiated from the LAN by configuring blocked services in the Services screen. You may allow traffic
initiated from the WAN by configuring port-forwarding rules, one-to-one/many one-to-one mapping rules
and/or allow remote management.
The firewall is automatically enabled when you configure blocked services. When you configure a remote
management menu to allow access to the ZyAIR, a firewall rule (WAN-to-WAN) is automatically created.
Click ADVANCED and FIREWALL to open the Settings screen. Enable (or activate) the firewall by
selecting the Enable Firewall check box as seen in the following screen.
Vista de pagina 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 395 396

Comentarios a estos manuales

Sin comentarios